View B39202B8004P810_9075487.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

saw components baw/saw duplexer wcdma band ii series/type: ordering code: b8004 B39202B8004P810 date: version: september 02, 2014 2.0 ? epcos ag 201 5 . reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without epcos' prior express consent is prohibited. epcos ag is a tdk group company.
2 september 02, 2014 b8004 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components baw/saw duplexer data sheet application n low-loss baw/saw duplexer for mobile telephone wcdma band ii systems n low insertion attenuation n low amplitude ripple n usable passband 60 mhz n single ended to balanced transformation in antenna - rx path n impedance transformation 50 w to 100 w in antenna - rx path features n package size 2.0 x 1.6 mm 2 , max. height 0.45 mm n rohs compatible n approx. weight 0.0056g n package for s urface m ount t echnology ( smt ) n ni, gold-plated terminals n fully matched by integrated matching network n e lectrostatic s ensitive d evice ( esd ) n m oisture s ensitivity l evel 3 bottom view side view top view 5 2.0 3 2 1 76 6 4 3 2 1 9 1.6 8 4 0.45 max 0.35 7 0.7 5 0.43 0.33 8 0.29 0.29 pin configuration n 3 tx input n 1, 8 rx output (balanced) n 6 antenna n 4, 5, 9 to be grounded n 2, 7 to be grounded 3 1 8 4,5,9 6 2,7
3 september 02, 2014 b8004 1880.0 / 1960.0 mhz saw components baw/saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = C20 ?c to +85 ?c ant terminating impedance: z ant =50 w rx differential mode terminating impedance: z rxd = 100 w and matching (refer to page 6) rx common mode terminating impedance: z rxc =25 w tx terminating impedance: z tx =50 w characteristics tx - ant min. typ. @ 25?c max. center frequency f c 1880.0 mhz maximum insertion attenuation @f carrier 1852.4 ... 1907.6 mhz a wcdma 1) 1) attenuation of wcdma signal (powertransferfunction). please refer to annotation on page (6). 2.2 3.0 db @f carrier 1852.4 ... 1907.6 mhz a wcdma 1) 2.2 2.5 3) db error vector magnitude @f carrier 1852.4 ... 1907.6 mhz evm 2) 2) error vector magnitude (evm) based on definition given in 3gpp ts 25.141. 1.1 3.0 % @f carrier 1852.4 ... 1907.6 mhz evm 2) 1.1 2.0 3) 3) valid for room temperature 25 ?c % input vswr (tx port) 1850.0 ... 1910.0 mhz 1.5 2.0 output vswr (ant port) 1850.0 ... 1910.0 mhz 1.7 2.0 attenuation a 10.0 ... 728.0 mhz 30 32 db 728.0 ... 764.0 mhz 30 33 db 869.0 ... 894.0 mhz 30 34 db 1574.0 ... 1577.0 mhz 36 38 db 1577.0 ... 1680.0 mhz 30 38 db @f carrier 1932.4 ... 1987.6 mhz a wcdma 1) 45 50 db 2110.0 ... 2155.0 mhz 35 41 db 2400.0 ... 2500.0 mhz 23 27 db 3690.0 ... 3830.0 mhz 20 25 db 5150.0 ... 5350.0 mhz 16 21 db 5540.0 ... 5860.0 mhz 14 17 db
4 september 02, 2014 b8004 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components baw/saw duplexer data sheet characteristics temperature range for specification: t = C20 ?c to +85 ?c ant terminating impedance: z ant =50 w rx differential mode terminating impedance: z rxd = 100 w and matching (refer to page 6) rx common mode terminating impedance: z rxc =25 w tx terminating impedance: z tx =50 w characteristics ant - rx min. typ. @ 25?c max. center frequency f c 1960.0 mhz maximum insertion attenuation @f carrier 1932.4 ... 1987.6mhz a wcdma 1) 1) attenuation of wcdma signal (powertransferfunction). please refer to annotation on page (6). 2.5 3.7 db @f carrier 1932.4 ... 1987.6mhz a wcdma 1) 2.5 3.0 2) 2) valid for the temperature range from 0 ?c to 85 ?c. db error vector magnitude @f carrier 1932.4 ... 1987.6 mhz evm 3) 3) error vector magnitude (evm) based on definition given in 3gpp ts 25.141. 1.6 6.0 % @f carrier 1932.4 ... 1987.6 mhz evm 3) 1.6 3.5 5) % @f carrier 1932.4 ... 1987.6 mhz evm 3) 1.6 3.2 4) 4) valid for room temperature 25 ?c. % input vswr (ant port) 1930.0 ... 1990.0 mhz 2.0 2.6 1935.0 ... 1990.0 mhz 1.5 2.0 5) output vswr (rx port) 1930.0 ... 1990.0 mhz 1.8 2.4 1930.0 ... 1990.0 mhz 1.8 2.0 5) attenuation a 10.0 ... 1765.0 mhz 30 49 db 1835.0 ... 1850.0 mhz 30 52 db @f carrier 1852.4 ... 1907.6 mhz a wcdma 1) 45 56 db 2025.0 ... 2050.0 mhz 10 27 db 2050.0 ... 2075.0 mhz 25 31 db 2400.0 ... 2484.0 mhz 30 52 db 2810.0 ... 2910.0 mhz 30 56 db 3775.0 ... 3905.0 mhz 30 60 db 5625.0 ... 5815.0 mhz 30 63 db 2075.0 ... 6000.0 mhz 30 35 db 5) valid for the temperature range from 25 ?c to 85 ?c.
5 september 02, 2014 b8004 1880.0 / 1960.0 mhz saw components baw/saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = C20 ?c to +85 ?c ant terminating impedance: z ant =50 w rx differential mode terminating impedance: z rxd = 100 w and matching (refer to page 6) rx common mode terminating impedance: z rxc =25 w tx terminating impedance: z tx =50 w characteristics ant - rx min. typ. @ 25 ?c max. common mode rejection ratio cmrr 1930.0 ... 1990.0 mhz 21 1) 1) a combination of 10 ? phase balance and 1db amplitude balance corresponds to 19.6 db cmrr 26 db imd product level limits 2) at f tx =1880mhz, f rx =1960mhz 2) imd product level limits for power levels p tx =21.5dbm (antenna port output power) and p blocker =-15dbm (antenna port input power) blocker 1 80.0 mhz C94 dbm blocker 2 1800.0 mhz C115 dbm blocker 3 3840.0 mhz C110 dbm characteristics tx - rx min. typ. @ 25 ?c max. isolation a @f carrier 1852.4 ... 1907.6 mhz a wcdma 1) 1) attenuation of wcdma signal (powertransferfunction). please refer to annotation on page (6). 50 57 db @f carrier 1852.4 ... 1907.6 mhz a wcdma 1) 2) 2) valid for the temperature range from -20 ?c to +25 ?c. 53 57 db @f carrier 1932.4 ... 1987.6 mhz a wcdma 1) 46 52 db
6 september 02, 2014 b8004 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components baw/saw duplexer data sheet matching network (element values depend on pcb layout) annotation for characteristics section attenuation of wcdma signal (powertransferfunction, a wcdma ) is determined by f carrier according to 3gpp ts 25.101 (e.g. for wcdma band 2 passband, f carrier ranges from 1852.4 mhz (lowest tx channel) to 1907.6 mhz (highest tx channel)). h rrc (f) is the transfer function of the root-raised cosine transmit pulse shaping filter according to 3gpp ts 25.101 with the following normalization: maximum ratings operable temperature range 1) 1) defines the temperature range in which the baw / saw device keeps its typical characteristics, however the specification values are not valid for the extended range. t C30/+85 ?c storage temperature range t stg C40/+85 ?c dc voltage v dc 5.0 v esd voltage v esd 50 2) 2) acc. to jesd22-a115b (machine model), 10 negative & 10 positive pulses. v machine model, 10 pulses input power at p in source and load impedance 50 w 1850.0 ... 1910.0 mhz elsewhere 29 10 dbm dbm continuous wave t = 55?c, 50.000 h l s1 = 3.2 nh l s2 = 3.2 nh ant tx rx rx 3 6 2,7,4,5,9 1 8 l s1 l s2 } s s d21 f () h rrc ff carrier C () 2 f d C h rrc f () 2 f1 = d C
7 september 02, 2014 b8004 1880.0 / 1960.0 mhz saw components baw/saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response tx-ant (ptf) frequency response tx-ant (wideband)
8 september 02, 2014 b8004 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components baw/saw duplexer data sheet frequency response ant-rx (ptf), also spec lines for cw plotted frequency response ant-rx (wideband)
9 september 02, 2014 b8004 1880.0 / 1960.0 mhz saw components baw/saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response tx-ant passband (ptf) frequency response ant-rx passband (ptf)
10 september 02, 2014 b8004 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components baw/saw duplexer data sheet frequency response tx-rx (ptf)
11 september 02, 2014 b8004 1880.0 / 1960.0 mhz saw components baw/saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. vswr tx-port vswr rx-port (differential mode) vswr ant-port
12 september 02, 2014 b8004 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components baw/saw duplexer data sheet type b8004 ordering code B39202B8004P810 marking and package c61157-a8-a81 packaging f61074-v8247-z000 date codes l_1126 s-parameters b8004_nb_un.s4p (unmatched, nearby) b8004_wb_un.s4p (unmatched, wideband) see file header for port/pin assignment table soldering profile s_6001 rohs compatible rohs-compatible means that products are compatible with the requirements according to art. 4 (substance restrictions) of di- rective 2011/65/eu of the european parliament and of the council of june 8 th , 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment ("directive") with due regard to the application of exemptions as per annex iii of the directive in certain cases. moldability before using in overmolding environment, please contact your epcos sales office. matching coils see inductor pdf-catalog http:// www .tdk.co.jp/tefe02/coil.htm#aname1 and data library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm for further information please contact your local epcos sales office or visit our webpage at w ww.epcos.com . published by epcos ag systems, acoustics, waves business group p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2014. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or t he international representatives. due to technical requirements components may contain dangerous substances. for information on t he type in question please also contact one of our sales offices.
13 september 02, 2014 important notes t he following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, ceralink, ceraplas, csmp, cssp, ctvs, deltacap, digisimic, dssp, filtercap, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, the following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, ceralink, ceraplas, csmp, cssp, ctvs, deltacap, digisimic, dssp, filtercap, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, tfap, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.

▲Up To Search▲

Price & Availability of B39202B8004P810

	To Download B39202B8004P810 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .